UPVC & PVC Cladding Spraying in Portsmouth: A Homeowner’s Guide

UPVC & PVC Cladding Spraying in Portsmouth: A Homeowner’s Guide

Thousands of Portsmouth homes carry UPVC or PVC cladding — shiplap gables, weatherboarded dormers and porches, panelled bays — and the seafront climate is hard on all of it. South-facing plastic fades and chalks in the salt air, white turns grey-yellow, and dated woodgrain finishes age a house that is otherwise perfectly sound. Spraying recolours all of it on-site, in any colour, for a fraction of the cost of re-cladding.

It is part of the UPVC spraying service we run across Portsmouth, from Southsea and Eastney up through Cosham, Drayton and Portchester.

What Cladding Can Be Sprayed

• UPVC shiplap and PVC weatherboarding on gables, dormers and full elevations.
• Cladding panels on bays, porches and garage frontages.
• Fascias, soffits and bargeboards — usually sprayed in the same visit.
• Composite and fibre-cement boards, with the correct primer system.

If you are unsure what your boards are made of, our guide to composite versus metal cladding spraying covers how different materials are prepared — and the survey confirms it before anything is quoted.

Any Colour, Matched to the Rest of the House

Cladding is usually recoloured as part of a bigger refresh: anthracite grey cladding above white rendered walls, or cladding matched to new windows and doors. Any RAL or BS shade is available, so the cladding, fascias and frames can be brought to one consistent scheme in a single visit.

The Process on a Portsmouth Home

Every surface is washed and degreased — essential near the coast, where salt residue defeats adhesion — then masked, primed with an adhesion primer made for PVC, and sprayed with specialist topcoats. Most homes are finished in one to two days with no scaffolding-bound weeks, no skips of stripped boards, and no mess inside the house.

Cost: Spraying vs Re-Cladding

Re-cladding an elevation quickly runs into thousands once boards, battens, trims and labour are counted. Spraying restores the existing boards at a fraction of that, and it is commonly combined with window and door spraying to refresh the whole frontage in one job — our Portsmouth UPVC guide covers the wider costs and colours.

Built for the Seafront Climate

The coatings we use are UV-stable and formulated for exterior plastics, so the colour holds against the salt air and south-coast sun that faded the original finish. The work is backed by a written guarantee, confirmed with the quote.

Book a Free Survey in Portsmouth

For a free survey and fixed written quote on cladding spraying anywhere in Portsmouth — Southsea, North End, Cosham, Farlington, Portchester — start from our Portsmouth UPVC spraying page. Commercial building? See our commercial cladding spraying service for Portsmouth instead.

Frequently Asked Questions

Can PVC cladding be painted or sprayed?

Yes — with the correct preparation and an adhesion primer made for exterior plastics, PVC and UPVC cladding takes a sprayed finish extremely well. Brush-painting with standard masonry or gloss paint is what fails; a sprayed specialist system does not.

How much does cladding spraying cost in Portsmouth?

It is priced by area and condition — a single gable costs far less than full elevations — and is consistently a fraction of the cost of re-cladding. A free survey confirms a fixed written quote.

What colours can cladding be sprayed?

Any RAL or BS colour. Anthracite grey is the most requested modern shade, and cladding is often matched to newly sprayed windows, doors and fascias for one consistent scheme.

How long does sprayed cladding last by the coast?

The topcoats are UV-stable and formulated for exterior plastics, so they hold their colour in coastal conditions. The finish is backed by a written guarantee confirmed with your quote.